NP5100 series are the safe serial networking server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This product supports 16/32 RS-232/485/422 serial ports to 2 100M Ethernet copper ports. It adopts rack mounting to meet the requirements of different application scenes.
Serial device server supports multiple network protocols, such as TCP, UDP, TELNET, ARP, ICMP, HTTP, HTTPS, SMTP, SNTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, UDP Server, UDP Client work modes and TELNET, WEB and SSHD access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
This product supports optional OLED display, which could conduct IP address configuration without using external device. The SD card design of this device can achieve software upgrade. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can adapt to the industrial scene environment with harsh requirements for EMC. It can be widely used in custom checkpoint system, smart gas station, data center and industrial automation, etc.
Features and Benefits
Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces and provide dual IP and MAC addresses to meet the requirements of multi-network management or network backups
Support 300bps-115200bps line speed and non-blocking communication
Support TCP Server, TCP Client, UDP Server, UDP Client and other operating modes
Support OLED display that could configure device IP address
Support cross-gateway and cross-router communication
Support multiple hosts polling mode, which allows multiple hosts to access the same serial port
Support delimiter matching communication, achieving various demands for serial port packaging
Support FIFO, compatible with various old type terminal devices
Support IP address and MAC address filtering, which can achieve accurate access control easily
Support graded user management to implement humanized authority management
Support serial port status, parameters and error information monitoring, ensuring the communication status be clear at a glance
Support RTS/CTS, DTR/DSR and XON/XOFF flow control
Compatible with various virtual serial port management software
Support virtual serial port drive access mode and automatic connection recovery after network interruption
Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
Support standard TCP/IP SOCKET application access
TCP supports multi-connection, which allows maximum 4 users to monitor or manage the serial device simultaneously
UDP supports single machine or multi-machine communication, which allows multiple users to monitor or manage the serial device simultaneously
Support multiple configuration forms like Windows configuration tool, TELNET, SSHD and WEB
SSHD and HTTPS configuration can guarantee the access security of data
Support multiple alarm methods, including e-mail alarm, log alarm and system alarm
Support multiple alarm events including power supply connection, warm start, cold start, DCD and DSR
Conduct network diagnosis and troubleshooting via Ping and Traceroute
Support ARP function, which can prevent communication interrupt caused by the switch and router aging the MAC address of serial server
| Ethernet | Standard: 10Base-T, 100Base-TX
Protocol: TCP, UDP, ARP, HTTP, HTTPS, TELNET, ICMP, SMTP, SNTP, DHCP, DNS Rate: 10/100M Automatic Flow Control, MDI/MDI-X Autotunning Interface form: RJ45 Interface quantity: 2 Duplex mode: full/half duplex mode self-adaption Work mode: each serial port can simultaneously establish up to 4 TCP/UDP session connections, support work modes such as RealCom, Reverse RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast, Telnet, Reverse Telnet, RFC2217, Redundant COM, DRDAS RealCom and DRDAS TCP Server |
| Serial Port | Standard: EIA RS-232C, RS-485, RS-422
Quantity of serial port: 8/16/32 3IN1 serial ports RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, GND, R+, R- Baud rate: 110bps-921600bps Data bit: 5bit, 6bit, 7bit, 8bit Parity bit: None, Even, Odd, Space, Mark Stop bit: 1bit, 1.5bit, 2bit Interface form: RJ45 Flow control: RTS/CTS, DTR/DSR, XON/XOFF Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC) Load capacity: RS-485/422 supports 32 points polling (customizable 256 points) Transmission distance: RS-232, 15m; RS-485/422, 1200m Pull up/down resistance for RS-485: 4.7kΩ Electromagnetic isolation strength: 2kVDC |
| Console Port | CLI command line management port (RS-232), RJ45 |
| Configuration Method | WEB configuration management, TELNET configuration, Windows configuration tool, SSHD configuration |
| Security | User right classification, IP address filtering, MAC address filtering, SNMP/ Mail /System Log alarm, HTTP/HTTPS/SSHD/TELNET access control |
| Indicator | Power supply indicator, Ethernet port indicator, serial port indicator, running indicator |
| Power Supply | 85~265VAC dual power supply redundancy, AC power supply socket with switch |
| Power Consumption | No-load: 5.6W@220VAC
Full-load: 13.2W@220VAC |
| Working Environment | Operating temperature: -40~75℃
Storage temperature:-40~85℃ Relative humidity: 5%～95%(no condensation) |
| Physical Characteristic | Housing: IP40 protection, metal
Installation: rack mounting Dimension (W x H x D): 440mm×44mm×265.6mm Weight: 3.04kg |
| Industrial Standard | IEC 61000-4-2 (ESD, electrostatic discharge), Level 4
l Air discharge:± 15kV l Contact discharge: ±8kV IEC 61000-4-4 (EFT, electrical fast transient), Level 4 l Power supply: ±4kV l Ethernet port: ±2kV l Serial port: ±2kV IEC 61000-4-5 (Surge), Level 4 l Power supply: common mode±4kV, differential mode±2kV l Network port: common mode±4kV, differential mode±2kV l Serial port: common mode±4kV, differential mode±2kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
| Authentication | CE, FCC, RoHS |
| Available Models | 100M Copper Port | 3IN1(RS-232/485/422) | OLED Display | Power Supply |
| NP5100-2T-8DI(3IN1)-RJ-OLED-2P(85-265VAC) | 2 | 8 | 1 | 85~265 VAC
dual power supply |
| NP5100-2T-8DI(3IN1)-RJ-2P(85-265VAC) | 2 | 8 | – | |
| NP5100-2T-16DI(3IN1)-RJ-OLED-2P(85-265VAC) | 2 | 16 | 1 | |
| NP5100-2T-16DI(3IN1)-RJ-2P(85-265VAC) | 2 | 16 | – | |
| NP5100-2T-32DI(3IN1)-RJ-OLED-2P(85-265VAC) | 2 | 32 | 1 | |
| NP5100-2T-32DI(3IN1)-RJ-2P(85-265VAC) | 2 | 32 | – |
