TEL: 0904251826
Icon Collap
Trang chủ » Tất cả sản phẩm » Switch công nghiệp quản lý Layer 3 12 cổng Gigabit Ethernet + 12 cổng Gigabit SFP + 4 cổng 10Gigabit SFP+ 3Onedata ICS5400PTP-12GT12GS4XS

Switch công nghiệp quản lý Layer 3 12 cổng Gigabit Ethernet + 12 cổng Gigabit SFP + 4 cổng 10Gigabit SFP+ 3Onedata ICS5400PTP-12GT12GS4XS

Model : ICS5400PTP-12GT12GS4XS
Lượt truy cập: 3467 Lượt xem

Support 12 Gigabit Ethernet copper ports + 12 Gigabit Ethernet SFP fiber ports + 4 10Gigabit Ethernet SFP+ fiber ports
Support  Precision Time Protocol (PTP), provide sub-microsecond synchronization accuracy to meet requirements for high-precision time synchronization
Support multiple network protocols and industrial standards, such as STP/RSTP, DHCP, VLAN, QoS function, IGMP Snooping function, LLDP, etc.
Support dual power redundancy, input voltage: 12~48VDC, compatible with 90~264VAC
Support IP40 protection grade
Support -40~60℃ wide operating temperature range

Chia sẻ:

Switch công nghiệp quản lý Layer 3 12 cổng Gigabit Ethernet + 12 cổng Gigabit SFP + 4 cổng 10Gigabit SFP+ 3Onedata ICS5400PTP-12GT12GS4XS

ICS5400PTP-12GT12GS4XS is a 28-port Gigabit/10Gigabit switch, and a layer 3 industrial Ethernet switch that integrates the characteristics of PTP. Provide a variety of interfaces such as Gigabit copper port, Gigabit SFP slot, 10Gigabit SFP+ slot, which can negotiate the port rate and duplex mode with the device at the opposite end through self-negotiation. Support 12~48VDC power supply scheme (compatible with 90~264VAC), and adopt rack installation mode, which can meet the requirements of different application sites.

Network management system supports various network protocols and industrial standards, such as PTP, MRP, STP/ RSTP, DHCP, VLAN, QoS function, IGMP Snooping, LLDP, etc. It also possesses complete management functions, including Port Configuration, Access Control, Network Diagnosis, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. The design of DIP switch could implement device factory setting recovery. The hardware adopts fanless, low power consumption and wide temperature design, which has passed rigorous industrial standard tests, and suits for the industrial scene environment with harsh requirements for EMC. It can be widely used in AP coverage, railway transportation, smart city, safe city, new energy, smart grid, intelligent manufacturing and other industrial fields.


SNMPv1/v2c/v3 is used for network management of various levels
RMON can be used for efficient and flexible network monitoring
QoS supports real-time traffic classification and priority setting
LLDP can achieve automatic topology discovery, which is convenient for visual management
DHCP server and DHCP client could be used for allocating IP address of different strategies
DHCP Snooping can ensure DHCP client gets IP address from legal DHCP server
DHCP relay function can realize IP address, gateway, DNS configuration cross network segment
File management is convenient for the device rapid configuration and online upgrading
User privilege classification configuration can set user privilege level
SSH configuration and HTTPS configuration can improve device’s management security and guarantee data access security
Support AAA service, which can provide security assurance for various services
IPMC file configuration can deploy access control on IP multicast flow
MVR configuration supports multicast communication forwarding on multicast VLAN
EPS configuration can realize network status monitor
CFM function can determine the scope and boundary of maintenance domain
EPRS function can realize link backup and improve the reliability of network
Storm suppression can restrain broadcast, unknown multicast and unicast
VLAN is used for simplifying network planning
Private VLAN function could achieve port isolation in the same VLAN and save Vlan resources
GVRP configuration could be used for registering and unregistering VLAN properties
Port trunking and LACP can increase network bandwidth and enhance the reliability of network connection to achieve optimum bandwidth utilization
IGMP Snooping can be used for filtering multicast traffic to save the network bandwidth
MLD Snooping could be used for managing and controlling IPv6 multicast group
Link OAM function can monitor the health of the network and locate faulted link and fault conditions
VCL function can divide VLAN based on MAC address, protocol, and IP subnet.
PTP provides sub-microsecond synchronization accuracy to meet requirements for high-precision time synchronization
Support MRP. When a single device fails, it does not affect the entire network communication

Standard & Protocol IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE1588 for PTP

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEC 62439–2 for MRP

ITU-T G.8032 for ERPS

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

Management PTP Time Synchronization, SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, DHCP Snooping, DHCP relay, user password, login method, link OAM, Loop Protection, File Management, Log Management, Port Statistics
Security User Privilege Classification, Authentication Method Configuration, SSH Configuration, HTTPS Configuration, Access Control, SNMP, RMON, NAS, ARP, IP Source Guard, ARP Inspection, AAA, Radius Server Authentication, TACACS + Server Authentication, ACL, Port Alarm, Power Supply Alarm
Switch Function 802.1Q Vlan, Private VLAN, VCL, Port Static/Dynamic Aggregation, LACP, sFlow, UPnP
Unicast / Multicast GVRP, IGMP-Snooping, IPMC, MVR, MLD Snooping
Redundancy Technology MRP(Master/Client), STP/RSTP, ERPS
Troubleshooting Ping(IP v4), Ping(IP v6), Traceroute, Retrieve OAM MIB, VeriPHY Cable Diagnostics
Time Management NTP Client Configuration, Time Zone Configuration
Interface Gigabit copper port: 10/100/1000Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

Gigabit SFP: 100/1000Base-X self-adaptive SFP slot

10Gigabit SFP+: 1000/10GBase-X self-adaptive SFP+ slot

Console port: CLI command line management port (RS-232), RJ45

PPS port: support 1 PPS signal input; adopt BNC interface for connecting an external time source

Indicator Running Indicator, Alarm Indicator, Power Supply Indicator, Interface Indicator
Switch Property Transmission mode: store and forward

Packet forwarding rate: 130.944Mpps

MAC address: 32K

Buffer: 32Mbit

Backplane bandwidth: 128G

Switch time delay: <10μs

Power Supply 12~48VDC (compatible with 90~264VAC), dual power supply redundancy, 7-Pin 5.08mm, power supply occupies 5 pins
Power Consumption No-load: 28.2W@48VDC (normal temperature),

34.0W@48VDC (high temperature)

Full-load: 33.1W@48VDC (normal temperature),

38.5W@48VDC(high temperature)

Working Environment Operating temperature: -40~60℃

Storage temperature:-40~85℃

Relative humidity: 5%~95%(no condensation)

Physical Characteristic Housing: IP40 protection, metal

Installation: rack mounting

Weight: About 4000g

Dimension (W x H x D): 441.6 (exclude lugs) mm×43.8mm×309.3mm

Industrial Standard IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge:± 8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3

Power supply: ±2kV

Ethernet port: ±1kV

IEC 61000-4-5 (Surge), Level 3

Power supply: common mode±2kV, differential mode±1kV

Ethernet port: common mode±2kV, differential mode±1kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication CE, FCC
MTBF 382,614 hours

ICS5400PTP-12GT12GS4XS Datasheet


Available Models Gigabit Copper Port Gigabit SFP 10Gigabit SFP+ Power Supply
ICS5400PTP-12GT12GS4XS 12 12 4 Dual power supply 12~48VDC

Compatible with 90~264VAC

Đăng ký nhận bản tin