Máy khách không dây công nghiệp 3Onedata IAP2300C

Máy khách không dây công nghiệp 3Onedata IAP2300C

IAP2300C series are 100M industrial wireless clients. This series have 4 products, providing 100M WAN port, 100M LAN port, 2.4G/5G dual-band antenna interface, serial port and other interfaces. This series of products provides one serial port, and supports serial port server or Modbus gateway, so that serial port devices can be equipped with networking capability immediately or realize the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series product supports DIN-Rail or wall mounting, which can meet the requirements of different scenes.
The management system supports routing, AP, bridge, client and dual link wireless work mode; Support IEEE802.11a/b/g/n wireless technology, the wireless rate of the 2E single band whole device is up to 300Mbps, the wireless rate of the 2E2E dual band whole device is up to 600Mbps. The device supports wireless encryption methods such as WPA/WPA2/WPA3 personal edition and enterprise edition, and has various security policies such as SSID hiding, wireless user isolation, IP address filtering, MAC address filtering, URL filtering, port forwarding, port redirection, ARP binding, DMZ setting, etc. Support virtual AP, that is, one AP device supports multiple SSIDs. The device supports single-band wireless fast roaming, client efficient roaming, dual-link seamless roaming. And the efficient roaming takes only about 50 milliseconds, which can meet the requirements of rapid roaming and recovery of wireless data in industrial occasions. Dual-link seamless roaming, that is, in the WLAN (Wireless Local Area Network) constituted by multiple AP, user can achieve seamless roaming without conducting the AP switching operation. In serial server mode, each serial port supports 4 TCP or UDP session connections and multiple work modes like RealCom, TCP Server, TCP Client, UDP Server, UDP Client. Under Modbus protocol mode, work modes such as RTU Master, RTU Slave, ASCII Master and ASCII Slave are supported. Up to 256 Modbus TCP Client(Master) devices can be accessed, and 128 Modbus TCP Server(Slave) devices can be connected.

The button can achieve restore factory defaults, enable debugging WLAN(2T) or restart (5T). The hardware adopts fanless, low power consumption, wide temperature, wide pressure design, through strict testing in line with industry standards, can adapt to the industrial site environment with harsh requirements for EMC, can be widely used in the robot industry: sorting robot, small freight robot, etc.

Features and Benefits

Support network modes like routing mode, AP mode, bridge mode, client mode and dual-link mode, support connection methods like WDS and universal bridge
The client mode supports wireless NAT connection, and the wireless network can connect with the external network through PPPoE, static IP and DHCP dynamic acquisition, and implement route switch
Support high-speed wireless connection, the transmission speed of 2E single-band can reach up to 300Mbps, the transmission speed of 2E2E dual-band can reach up to 600Mbps
Support multi-AP fast roaming technology, and the switching time of efficient roaming is less than 50ms
Support SNMP network management and Trap alarm, and allow multicast passthrough
Support multiple SSID settings and provide SSID hiding function
Support WPA/WPA2/WPA3 wireless encryption method of both personal edition and enterprise edition and TKIP/AES encryption algorithm
AC management can specify AC device information to realize directional management
Support wireless probe, it can realize personal positioning function with location engine
Roaming proxy can realize roaming proxy host across network segments, effectively avoiding the data interruption caused by the failure to update the forwarding list of upper-level device in time
Support firewall functions like IP filtering, MAC filtering, URL filtering, port forwarding, ARP binding, DMZ isolation area
Support wireless user management and user event, and support blacklist and whitelist filtering rules, wireless user online/offline notification
WMM can achieve better transmission quality of voice, video and other applications in wireless networks
Network detection can realize network diagnosis and specific network recovery operations
Support QoS policy to limit the rate of IP or MAC addresses in specified range
Network diagnosis and troubleshooting could be conducted via Ping and traceroute
Support serial port log and system log management, and realize system log synchronization to remote log server
Serial application can realize immediate networking of serial devices and support virtual COM and TCP/UDP network connection
Support serial port 300bps-115200bps line speed non-blocking communication
Support multiple serial port modes like RealCom, TCP Server, TCP Client, UDP Server, UDP Client, etc.
Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other Modbus protocol modes
Support up to 256 Modbus TCP client (master) accesses and connect up to 128 Modbus TCP server (slave)  devices
Support virtual and real ID mapping to achieve flexible access between Master and Slave devices

IAP2300C Series Datasheet

IAP2300C Series QIG

Accessories