TEL: 0904251826
Icon Collap
Trang chủ » Tất cả sản phẩm » Switch công nghiệp quản lý Layer 3 12 cổng Gigabit SFP 3Onedata ICS5556-IM-12GS
Thumb Product

Switch công nghiệp quản lý Layer 3 12 cổng Gigabit SFP 3Onedata ICS5556-IM-12GS

Model : ICS5556-IM-12GS
Lượt truy cập: 3343 Lượt xem

Support 8 10Gigabit SFP+ slots and 4 board card slots which can match 12 Gigabit SFP slot board cards or 12 Gigabit copper port board cards (optional)

Adopt Ring patented technology, support single ring, coupling ring, chain, Dual-homing function

Support ERPS and loop detection, which can eliminate loop effectively and prevent broadcast storm caused by data loop

10 Gigabit bandwidth can transmit large amounts of video, voice and data with high performance and high speed

Support AC redundant power supply, input voltage: 100~240VAC

Support -40~65℃ wide operating temperature range

Chia sẻ:

Switch công nghiệp quản lý Layer 3 12 cổng Gigabit SFP 3Onedata ICS5556-IM-12GS

ICS5556 series are 56-port Gigabit/10Gigabit layer 3 Ethernet switches, which adopts modular structure design and supports multiple combinations of frame and board card. The frame supports 8 10Gigabit SFP + slots, the board cards support 12 Gigabit SFP slots or RJ45(optional), and the whole machine adopts 2U rack installation. Abundant numbers of interfaces, bandwidth of Gigabit/10Gigabit combination and ability to transmit large amounts of video, voice and data with high performance and high speed meet the application requirements of large-scale industrial network.

Network management system supports a variety of network protocols and industry standards, such as ARP, VRRP, RIP, OSPF, BGP, NAT, ERPS, STP/ RSTP/MSTP, 802.1Q VLAN, QoS function, IGMP Snooping static multicast function, PIM, LLDP, port trunking, port mirror, etc. It has perfect management functions, supporting port configuration, port statistics, network diagnosis, rapid configuration, online upgrade, loop detection, etc. CLI, WEB, Telnet, SSH, SNMP and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.

RESET button can be used to reboot the device and restore factory defaults. This product supports redundant AC power supply. The input power supply is two independent power supply modules which can ensure the normal operation of the device when one power supply fails. When power supply or link has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

Features and Benefits

SNMPv1/v2c/v3 is used for network management of various levels
RMON can be used for efficient and flexible network monitoring
Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
QoS supports real-time traffic classification and priority setting
LLDP can achieve automatic topology discovery, which is convenient for visual management
DHCP server and DHCP client could be used for allocating IP address of different strategies
File management is convenient for the device rapid configuration and online upgrading
Log management records the information of booting, operation and connection
Bandwidth management can reasonably distribute network bandwidth, preventing unpredictable network status
Port statistics can be used for the port real time traffic statistics
ARP could be used for MAC address resolution
User password can conduct user hierarchical management to improve the device management security
ACL can enhance network flexibility and security
Relay alarm is convenient for troubleshooting of construction site
Storm suppression can restrain broadcast, unknown multicast and unicast
TELNET configuration and HTTPS configuration can guarantee the access security of data
VLAN is used for simplifying network planning
Port Trunking and LACP can increase network bandwidth and enhance the reliability of network connection to achieve optimum bandwidth utilization
PIM-DM/PIM-SM/PIM-SSM, IGMP Snooping, GMRP and static multicast can be used for filtering multicast traffic to save the network bandwidth
Bandwidth management and flow control can reasonably distribute network bandwidth, preventing unpredictable network status
Port isolation could achieve port isolation in the same VLAN and save Vlan resources
SW-Ring and STP/RSTP/MSTP can achieve network redundancy, preventing network storm
Ping, Traceroute, Port Loopback and DDM could achieve network diagnosis and troubleshooting
VRRP, RIP, OSPF, BGP could achieve dynamic routing configuration
With high reliability and stability, ERPS could avoid broadcast storm caused by data loopback
Loop detection could efficiently eliminate the influence caused by port loopback by detecting the existence of loopback

Standard & Protocol IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE802.3ae for 10GBase-X SFP+

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1AB for LLDP

ITU-T G.8032 for ERPS

Management SNMP v1/v2c/v3 Centralized Management Devices, RMON, Port Mirroring, QoS, LLDP, DHCP Server/Relay, File Management, Log Management, Port Statistics, ARP
Security User permission rating, ACL, NAT, port alarm, power alarm, storm suppression, Telnet/SSH configuration, DHCP Snooping, link flapping protection, aggregation protection, loop detection
Switch Function 802.1Q VLAN, Port Trunking, Bandwidth Management, Flow Control, Port Isolation
Unicast / Multicast Static Multicast, Multicast Routing, IGMP-Snooping, PIM-SM, PIM-DM
Redundancy Technology Ring, STP/RSTP/MSTP, ERPS
Troubleshooting Ping, Traceroute, Port Loopback, SFP Digital Diagnosis
Routing Technique VRRP, RIP, OSPF, BGP
Time Management NTP
Interface 10Gigabit SFP+: 1000/10GBase-X self-adaptive SFP+ slot

Gigabit SFP: 100/1000Base-X self-adaptive SFP slot

Gigabit copper port: 10/100/1000Base-T(X) self-adaptive RJ45, automatic flow control, support full/half duplex mode, MDI/MDI-X self-adaption

USB interface: Type-A USB 2.0 Female, support system debugging and configuration file management

CONSOLE port: CLI command line management port(RS-232), RJ45

MANAGER port: 10/100/1000Base-T(X) self-adaptive RJ45, automatic flow control, support full/half duplex mode, MDI/MDI-X self-adaption for device network management

Indicator Power indicator, alarm indicator, running indicator, interface indicator
Switch Property Transmission mode: store and forward

MAC address: 96K

Packet buffer size: 32Mbit

Backplane bandwidth: 256G

Power Supply 100~240VAC redundant power supply, single-phase socket with rocker switch
Power Consumption   Full-load: ≤ 60W@220VAC (all board cards and the complete machine are copper ports, under high temperature environment),

≤ 90W@220VAC (all board cards and the complete machine are fiber ports, under high temperature environment)

Working Environment Operating temperature: -40~60℃

Storage temperature:-40~60℃

Relative humidity: 5%~95% (no condensation)

Physical Characteristic Housing: IP30 protection, metal

Installation: 19-inch 2U rack mounting

Dimension (W x H x D): 482.6mm×88.3mm×374.3mm (lugs are included)

Weight: ≤ 9.5kg (complete machine)

Industrial Standard IEC61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge:± 8kV

Contact discharge: ±6kV

IEC61000-4-4 (EFT, electrical fast transient), Level 3

Power supply: ±2kV

Signal: ±1kV

IEC61000-4-5 (Surge), Level 3

Power supply: differential mode±1kV, common mode±2kV

Signal: differential mode±1kV, common mode±2kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication CE, FCC, RoHS

ICS5556 Series Datasheet

ICS5556 Series QIG

Available Models Type Gigabit 10 Gigabit Power Supply
RJ45 SFP SFP+
ICS5556-24GT24GS8GX-2P220 Complete machine 24 24 8 100~240VAC

Redundant power supply

ICS5556-MAIN-2P220 Frame 8
ICS5556-IM-12GT Board card 12
ICS5556-IM-12GS Board card 12
Đăng ký nhận bản tin

<