TEL: 0904251826
Icon Collap
Trang chủ » Tất cả sản phẩm » Bộ chuyển đổi Modbus Gateway 8 cổng RS-485/422 Modbus RTU/ASCII sang Ethernet Modbus TCP 3Onedata GW1108-8DI(RS-485)
Thumb Product

Bộ chuyển đổi Modbus Gateway 8 cổng RS-485/422 Modbus RTU/ASCII sang Ethernet Modbus TCP 3Onedata GW1108-8DI(RS-485)

Model : GW1108-8DI(RS-485)
Lượt truy cập: 2779 Lượt xem

Support 8 RS-232, RS-485/422 or 3IN1 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface

Support conversion between Modbus RTU/ASCII and Modbus TCP protocol

Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes

Support virtual and real ID mapping to achieve flexible access between Master and Slave devices

Support wide voltage input

Chia sẻ:

Bộ chuyển đổi Modbus Gateway 8 cổng RS-485/422 Modbus RTU/ASCII sang Ethernet Modbus TCP 3Onedata GW1108-8DI(RS-485)

GW1108 series of Modbus gateway are designed for integrating Modbus RTU/ASCII and Modbus TCP; they can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This series provide 3 types of products and support 8 RS-232, RS-485/422 or 3IN1 serial port and 1 100M Ethernet copper port. They adopt wall or desktop mounting to meet the requirements of different application scenes.

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

DIP switch or RST button can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

Features and Benefits

 Support 10/100Base-T(X) self-adaptive Ethernet interface

 Support 300bps-115200bps line speed and non-blocking communication

 Support RTS/CTS, DTR/DSR and XON/XOFF flow control

 Support response timeout setting of characters

 Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes

 Support up to 32 TCP Slave requests under Master mode

 Support up to 16 TCP Master connections under Slave mode

 Support virtual and real ID mapping to achieve flexible access between Master and Slave devices

 Support IP address and MAC address filtering, which is easy to achieve accurate access control

 Support classification of user management to achieve humanized permission management

 Support monitoring for serial port status and parameters, so the communication status will be clear at a glance

 Support Windows configuration tool, TELNET, WEB configuration forms and access control

 File management is convenient for the device rapid configuration and online upgrading

Ethernet Port  

Standard: 10Base-T, 100Base-TX

Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 1

Interface form: RJ45

Duplex mode: full/half duplex mode self-adaption

 

Serial Port  

Standard: EIA RS-232C, RS-485, RS-422

Protocol: Modbus RTU/ASCII

Quantity of serial port: 8 RS-232, RS-485/422 or 3IN1 serial port

RS-232 signal: DSR, RTS, GND, TXD, RXD, DCD, CTS, DTR

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300-115200bps

Data bit: 5bit, 6bit, 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: RS-232 serial port, adopt RJ45;

                           RS-485/422 serial port with isolation, adopt 5-pin 5.08mm pitch terminal blocks;

                           3IN1 serial port, adopt RJ45

Flow control: RTS/CTS, DTR/DSR, XON/XOFF

Directional control: RS-485 direction adopts Automatic Data Direction Control technology

Pull high/low resistor for RS-485: 4.7kΩ

Intensity of electromagnetic isolation: RS-485/422 serial port (terminal block), 3KVDC/2KVrms

Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave

Connection quantity: up to 32 TCP Slave requests are supported under Master mode

                                      up to 16 TCP Master connections are supported under Slave mode

 

Configuration  

WEB configuration management, TELNET configuration, Windows configuration tool

 

Security  

Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console

 

 

Indicator

 

Power supply indicator, running indicator, Ethernet port indicator, serial port indicator
 

Power

Requirement

 

 

GW1108-8D(RS-232)

Power supply range: 9~48VDC

Connection mode: 2-pin 5.08mm pitch terminal blocks

GW1108-8DI(RS-485), GW1108-8D(3IN1)-RJ45

Power supply range: 12~48VDC

Connection mode: 3-pin 5.08mm pitch terminal blocks

Power supply protection: nonpolarity connection

 

Power

Consumption

 

No-load: ≤3.16W@12VDC

Full-load: ≤3.90W@12VDC

 

Environmental

Limit

 

GW1108-8D(RS-232), GW1108-8D(3IN1)-RJ45

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95%(no condensation)

GW1108-8DI(RS-485)

Operating temperature: -40~70℃

Storage temperature: -40~70℃

Relative humidity: 5%~95%(no condensation)

 

Physical

Characteristic

 

Housing: IP30 protection, metal

Installation: wall or desktop mounting

Dimension (W x H x D): 160mm×28mm×95.5mm (RS-232)

                                           170mm×49.8mm×110mm (RS-485/422)

                                           170mm×31.5mm×110mm (3IN1)

Weight: 524g (RS-232), 740g (RS-485/422), 590g (3IN1)

 

Industrial

Standard

 

IEC 61000-4-2 (ESD, Electro-static Discharge), Level 4

Air discharge: ±15kV

Contact discharge: ±8kV

IEC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3 (except RS-232)

Power supply: ±2kV

Signal: ±1kV

IEC 61000-4-5 (Surge), Level 3 (except RS-232)

Power supply: common mode ±2kV, differential mode ±1kV

Signal: common mode ±2kV, differential mode ±1kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

 

Certification  

CE, FCC, RoHS

 

Warranty  

3 years

GW1108 Series Datasheet

Available Models 100M Copper Port RS-232 Port RS-485/422 Port RS-232/485/422 Port  Power Supply Range
GW1108-8D(RS-232) 1 8 9~48VDC
GW1108-8DI(RS-485) 1 8 12~48VDC
GW1108-8D(3IN1)-RJ45 1 8
Đăng ký nhận bản tin

<