TEL: 0904251826
Icon Collap
Trang chủ » Tất cả sản phẩm » Bộ chuyển đổi CAN sang RS-485 3Onedata CAN485
Thumb Product

Bộ chuyển đổi CAN sang RS-485 3Onedata CAN485

Model : CAN485
Lượt truy cập: 1984 Lượt xem

Support data conversion between 1 CAN port and 1 RS-485 serial port

Support multiple conversion modes like transparent conversion, marked transparent conversion, Modbus RTU protocol conversion and data conversion

CAN port support 2.5kbps-1000kbps baud rate

Support 9~48VDC wide voltage input

Support -40~75℃ wide operating temperature range

Chia sẻ:

Bộ chuyển đổi CAN sang RS-485 3Onedata CAN485

CAN485 is an interface converter that implements data exchange between CAN-bus network and RS-485 device. It also supports data exchange between CAN-bus network and Modbus RTU protocol. This product supports 1 CAN port and 1 RS-485 serial port and adopts wall mounting which can meet the requirements of different scenes.

CAN485 supports multiple conversion modes like transparent conversion, marked transparent conversion, Modbus RTU protocol conversion and data conversion. Otherwise, it provides matching CAN configuration tools which can achieve data conversion between CAN bus and RS-485 serial port via easy setup.

DIP switch could implement configuration mode enablement for device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, building automation, healthcare automation system, measuring instrument and environment monitoring system, etc.

CAN Interface  

Standard: CAN2.0A, CAN2.0B

Interface quantity: 1 CAN port

CAN signal: CANH, CANL, GND

Duplex mode: 2-wire Half Duplex Mode

Baud rate: 2.5kbps-1000kbps

Load capacity: support concurrent transmitting of 110 nodes 

Transmission distance: 40m~10km

Interface form: adopt 5-pin 5.08mm pitch terminal blocks

Terminating resistor: optional external 120Ω terminating resistor

Interface protection: 2KVAC isolation protection

 

Serial Port  

Standard: EIA RS-485

Protocol: Modbus RTU (optional)

Serial port quantity: 1 RS-485 serial port

RS-485 signal: D+, D-, GND

Baud rate: 300-115200bps

Data bit: 8bit

Check bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: DB9, Female

Transmission distance: 1200m

 

Configuration Method Windows configuration tool
Data Conversion Mode Transparent conversion, marked transparent conversion, Modbus RTU protocol conversion, data conversion
 

LED Indicator

 

Power supply indicator, CAN port indicator, serial port indicator
 

Power

Requirement

 

 

9~48VDC

2-pin 5.08mm pitch terminal blocks

Support non-polar connection

 

Power

Consumption

 

No-load: 1.58W@24VDC

Full-load: 1.59W@24VDC

 

Environmental

Limit

 

Operating temperature: -40~75℃

Storage temperature:-40~85℃

Relative humidity: 5%~95%(no condensation)

 

Physical

Characteristic

 

Housing: IP40 protection, metal

Installation: wall mounting 

Dimension (W x H x D): 69mm×22mm×100mm

Weight: 238g

 

Industrial

Standard

IEC 61000-4-2 (ESD, electrostatic discharge), Level 3

Air discharge: ±8kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

 

Certification  

CE, FCC, RoHS

 

Warranty  

3 years

CAN485 V1_0_0 Datasheet_20180907

Available Models CAN RS-485 Power Supply Range
CAN485 1 1 9~48VDC
Đăng ký nhận bản tin

<